Categories

Function

Details

Live

Fleet Management

Live Tracking

Monitor vehicle location on LIVE with Udrivetec WEBGPS fleet management center system.

Track according interval

Tracker sends currently position and status information to fleet management center as per set interval, shortest interval up to 5 seconds.

Multiple Geo-fence Area

Tracker can be set with more than 30 different Geo-fence areas , 5~50 vertexes. Detect real time position and status information when vehicle is driven into/out of geo-fence area area.

Speeding report

Monitor vehicle’s speed real time, send over speed alarm  to fleet management center when over speed.

Mileage

Calculate mileage and report by using of GPS speed or external speed sensor.

Fuel Monitor (Optional)

Detect fuel tank level, raise alert while fuel decrease or increase abnormally. Avoid leakage and fuel being stolen. The function suitable for fuel shipping vehicle or shipping company.

SMS tracking

Simply text to tracker request position. Tracker will check the cordinate in google map and reply location Address.

Alert & Warning

SOS Request

Driver hold the alarm button in emergency, tracker will report emergency alarm information to fleet management center and controller phone.

External Power cut off report

When Tracker’s power is cut off, tracker will report alarm to fleet management center. (Need additional battery)

Remote listening

Controller phone could call in and get the voice on tracker site, without interrupt the driver. Device will auto hang on call after

Immobility Vehicle

While vehicle being rob or stolen, user could immobize the vehicle.

Communication

Double fleet management Center

Send message to two server.

UDP/TCP Connection

Tracker supports various communication method, either SMS or GPRS (TCP / UDP). Accordance with the actual situation, Tracker can be set with both the main mode and supplement mode, or only a single mode of communication.

Support DNS Analyse

Tracker can be set to monitor domain name. Tracker resolves IP address as per domain name and build TCP connection.

Parameter set

All parameters of Tracker can be set or changed by sending order from fleet management center via GPRS.

Tracker control

Fleet management center can send order to control Tracker’s status, like switch On/Off, restart, factory setting etc.

Set parameter via cell phone

Any cell phone can be used to edit special short message to setup basic parameters, for example like center service, APN, server’s IP address, port number, domain name, controller number.

Power Management

Intellectual Power Control

Tracker can identify battery pressure automatically and keep working for either 12V or 24V battery.

Power Saving Mode

While engine off, device automatically switch off GPS and GPRS connection, extend more battery life

Low Voltage Protect

When car battery voltage lower than a specific value,  tracker will be switch off so as to avoid damage to battery because of over consummation.。

Software

Update

Firmware Upgrade

Newest firmware can be upgrade through GPRS or internal port

Self protection

Machine self detection

Tracker will detect whether all main components works, and report the malfunction information to driver when something abnormal happens, for repair and maintains convenience.

GPS antenna fleet management (Optional)

Device check GPS antenna open circuit or short circuit etc. This will be available to avoid inaccurate positioning caused by damage of GPS antenna.

Camera

(Optional)

Real time snapshot

Take picture by simply click button on the system, tracker send the picture by GPRS

Timing snapshot

Tracker can take snapshot as per set interval

Emergency automatic snapshot

When there is emergency alarm, Tracker will take snapshot as per set interval and times

Snapshot if status change

 When vehicle status changes (ACC on/off, vehicle door open/closed, empty/loaded vehicle), Tracker will take snapshot as per set interval and times.