|
Categories |
Function |
Details |
|
Live
Fleet Management |
Live Tracking |
Monitor vehicle location on LIVE with Udrivetec WEBGPS fleet management center system. |
|
Track according interval |
Tracker sends currently position and status information to fleet management center as per set interval, shortest interval up to 5 seconds. |
|
Multiple Geo-fence Area |
Tracker can be set with more than 30 different Geo-fence areas , 5~50 vertexes. Detect real time position and status information when vehicle is driven into/out of geo-fence area area. |
|
Speeding report |
Monitor vehicle’s speed real time, send over speed alarm to fleet management center when over speed. |
|
Mileage |
Calculate mileage and report by using of GPS speed or external speed sensor. |
|
Fuel Monitor (Optional) |
Detect fuel tank level, raise alert while fuel decrease or increase abnormally. Avoid leakage and fuel being stolen. The function suitable for fuel shipping vehicle or shipping company. |
|
SMS tracking |
Simply text to tracker request position. Tracker will check the cordinate in google map and reply location Address. |
|
Alert & Warning |
SOS Request |
Driver hold the alarm button in emergency, tracker will report emergency alarm information to fleet management center and controller phone. |
|
External Power cut off report |
When Tracker’s power is cut off, tracker will report alarm to fleet management center. (Need additional battery) |
|
Remote listening |
Controller phone could call in and get the voice on tracker site, without interrupt the driver. Device will auto hang on call after |
|
Immobility Vehicle |
While vehicle being rob or stolen, user could immobize the vehicle. |
|
Communication |
Double fleet management Center |
Send message to two server. |
|
UDP/TCP Connection |
Tracker supports various communication method, either SMS or GPRS (TCP / UDP). Accordance with the actual situation, Tracker can be set with both the main mode and supplement mode, or only a single mode of communication. |
|
Support DNS Analyse |
Tracker can be set to monitor domain name. Tracker resolves IP address as per domain name and build TCP connection. |
|
Parameter set |
All parameters of Tracker can be set or changed by sending order from fleet management center via GPRS. |
|
Tracker control |
Fleet management center can send order to control Tracker’s status, like switch On/Off, restart, factory setting etc. |
|
Set parameter via cell phone |
Any cell phone can be used to edit special short message to setup basic parameters, for example like center service, APN, server’s IP address, port number, domain name, controller number. |
|
Power Management |
Intellectual Power Control |
Tracker can identify battery pressure automatically and keep working for either 12V or 24V battery. |
|
Power Saving Mode |
While engine off, device automatically switch off GPS and GPRS connection, extend more battery life |
|
Low Voltage Protect |
When car battery voltage lower than a specific value, tracker will be switch off so as to avoid damage to battery because of over consummation.。 |
|
Software
Update |
Firmware Upgrade |
Newest firmware can be upgrade through GPRS or internal port |
|
Self protection |
Machine self detection |
Tracker will detect whether all main components works, and report the malfunction information to driver when something abnormal happens, for repair and maintains convenience. |
|
GPS antenna fleet management (Optional) |
Device check GPS antenna open circuit or short circuit etc. This will be available to avoid inaccurate positioning caused by damage of GPS antenna.
|
|
Camera
(Optional) |
Real time snapshot |
Take picture by simply click button on the system, tracker send the picture by GPRS |
|
Timing snapshot |
Tracker can take snapshot as per set interval |
|
Emergency automatic snapshot |
When there is emergency alarm, Tracker will take snapshot as per set interval and times |
|
Snapshot if status change |
When vehicle status changes (ACC on/off, vehicle door open/closed, empty/loaded vehicle), Tracker will take snapshot as per set interval and times. |
|
fuel detection |
fuel detection |
Terminal can control the fuel. When oil raise or decrease, it will report to the detection center. |
|
low fuel alarm |
Terminal can detect oil. When oil is abnormally low beyond standard, it will report to the detection center. |
